Tower Fabrication/Construction

Description of Work

1. Work under this Contract includes but is not limited to the provision of all labour, materials, and equipment required to:
   1. Fabricate three (3), new galvanized steel ATON towers as detailed below in accordance with the drawings provided in Appendix B3, specifics as detailed in table1 - SPW, page. 2:

1. All towers to be completed with bolting flange between each component section.
2. Each individual tower to be provided complete with:
   1. Fall Arrest System (Trylon Couger Rail);
   2. All necessary structural fasteners (excluding anchor bolts); and,
   3. Steel anchorage template (1/4” thickness minimum).
3. Transport the completed towers to designated CCG staging location.

1. The following work will be undertaken by others and is hereby excluded:
   1. Application of marine coating system (painting) inclusive of all preparatory work to facilitate bonding with galvanized surface;
   2. Supply of all SRAN Equipment; and,
   3. Site Installation.