Laboratory equipment - Analytical High Precision Microbalances
Solicitation number 5000078459
Publication date
Closing date and time 2024/02/14 14:00 EST
Last amendment date
Description
M1 The analytical high precision microbalances must have a Maximum Capacity (Max) of at least 6.1 g.
M2 The analytical high precision microbalances must have a Minimum Weight (USP, 0.1%) not greater than 0.6 mg.
M3 The analytical high precision microbalances must be capable of repeatability of not greater than 0.0003 mg with 5% load.
M4 The analytical high precision microbalances must have a Readability 0.0005 mg or better.
M5 The analytical high precision microbalances must have a temperature control system to aid with controlling fluctuations in temperature around the
weighing area.
M6 The analytical high precision microbalances must have the ability to store methods and data.
M7 The analytical high precision microbalances must have touchscreen operation that is glove compatible.
M8 The analytical high precision microbalances must have built in quality assurance monitoring and audit trail functions.
M9 The analytical high precision microbalances must have built in level controls, leveling guides, and internal adjustment capability.
M10 The analytical high precision microbalances must be provided with a draft shield and overload protection.
M11 The analytical high precision microbalances must have USB(A/B), RS232, and ethernet (LAN) interfaces to allow for connection to computer, device, or
offloading data to a flash drive.
M12 The analytical high precision microbalances must have touch free door operation to reduce risk of contamination.
M13 The analytical high precision microbalances must have 21 CFR Part 11 Complaint weighing capability and is Lab X compatible.
Contract duration
The estimated contract period will be 1 month(s), with a proposed start date of 2024/02/19.
Trade agreements
-
North American Free Trade Agreement (NAFTA)
-
Canada-Chile Free Trade Agreement (CCFTA)
-
Canada-Peru Free Trade Agreement (CPFTA)
-
Canada-Colombia Free Trade Agreement
-
Canada-Panama Free Trade Agreement
-
Canada-Honduras Free Trade Agreement
-
Canada-Korea Free Trade Agreement (CKFTA)
-
Canadian Free Trade Agreement (CFTA)
Reason for limited tendering
A contracting officer can use limited tendering for specific reasons outlined in the applicable trade agreements. The reason for this contract is described below:
-
Purchases Made Under Exceptionally Advantageous Conditions
Contact information
Contracting organization
- Organization
-
Natural Resources Canada
- Address
-
580 Booth Street
Ottawa, Ontario, K1A 0E4CANADA
- Contracting authority
- Anne C Joly
- Phone
- (999) 999-9999
- Email
- anne.joly@nrcan-rncan.gc.ca
- Address
-
580 Booth Street
Ottawa, Ontario, K1A 0E4CANADA
Bidding details
Details for this tender opportunity are provided in the Description tab.
Please contact the contracting officer to get the full solicitation documentation, access information on how to bid, or if you have any questions regarding this tender opportunity.
Note that there may be fees to access the documents or bid. These should be outlined in the Description tab.
We recommend that you contact the contracting officer as soon as possible, as there may be deadlines for receiving questions.