Pan Am Pool Main Tank Renewal

See B3 for Mandatory Site Investigations. 

D2.          SCOPE OF WORK

D2.1        The Work to be done under the Contract shall consist of the following completed during 
a partial facility closure:
(a)   Removal and replacement of existing mortar bed, waterproofing, ceramic tiles and grout 
throughout the main tank and adjacent deck areas,
(b)   Removal, salvage, storage, and re-installation of existing pool entry stairs, starting 
blocks, and stainless steel spring board supports,
(i)     The City will remove, salvage, store and reinstall pool access grab rails, Neptune chair 
lift, and existing temporary pool ladders. The contractor shall remain responsible for the 
replacement of anchors embedded in the concrete and mortar/tile bed of these fixtures.
(c)    Removal, refurbishment and re-installation of springboards and associated works,
(d)   Supply and installation of replacement pool stair railings.
(e)   Removal and replacement of rope anchors and deck fixture anchors embedded in the concrete and 
mortar/tile bed,
(f)    Removal and replacement of existing pool system plumbing fixtures and deck floor drains,
(g)   Removal and infilling of existing through tank wall light fixtures,
(h)   Removal and infilling of existing through tank windows,
(i)     Shoring or removal, salvage, protection, storage and reinstallation of existing tank 
divider bulkheads.
(j)     Removal and replacement of dive tower platform flooring.
(k)    Removal of guard rails at the 3m, 5m, 7.5m and 10m dive tower (Platform B) and replacement 
with stainless steel guard rails and glazing.
(l)     Removal of guard rails at the 3m springboard platform (Platform A) and replacement with 
stainless steel guard rails and glazing.
(m)  Concrete repairs to the:
(i)     pool deck,
(ii)     tank walls and floor,
(iii)     diving tower (Platform B), and
(iv)     3m springboard platform structure (Platform A).
(n)   Application of replacement of coating at locations of concrete repairs to the 3m springboard 
platform structure and dive tower (Platforms A and B),
(o)   Removal and replacement of pool area grounding system,
(p)   Implementation of specified abatement procedures for the removal of PCB-containing sealant at 
construction joints,
(q)   Implementation of specified lead abatement procedures for the removal of lead-based paint to 
facilitate Work,
(r)    Implementation of specified silica abatement procedures during demolition, sandblasting and 
shot blasting of materials containing silica.

(s)    Development and maintenance of plan and procedures for:
(i)     Safety and health,
(ii)     Site security,
(iii)     Site access,

D2.2        The Work will be completed by turning over to the Contractor areas of the facility 
where work is specified and maintaining a targeted access plan for specific public user groups 
only. Refer to Drawings for the locations of Contractor areas and partial public access areas.

D2.3        To facilitate the targeted access plan, the Contractor shall provide temporary access 
tunnels through the Main Tank construction work area at locations indicated. The targeted access 
plan will exclude public access while Work is scheduled at the locations of the temporary tunnels.

D2.4        The following shall apply to the Services:
(a)   City of Winnipeg Green Building Policy: New City-Owned Buildings and major additions; 
http://clkapps.winnipeg.ca/DMIS/DocExt/ViewDoc.asp?DocumentTypeId=2&DocId=5989
(b)   Universal Design Policy 
http://clkapps.winnipeg.ca/DMIS/DocExt/ViewDoc.asp?DocumentTypeId=2&DocId=3604
D2.5        The funds available for this contract are $5,650,000.00.
 

Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.