Automated Field Tester for hydrogen sulphide measurement
Solicitation number T8080-170054
Publication date
Closing date and time 2017/09/07 14:00 EDT
Description
To fully automate a field tester for the accurate measurement of measurement of hydrogen sulphide in the vapor phase above crude oil. Automation must be based upon standard readily available software. The automated field tester should meet the following requirements:
- Must measure H2S under different conditions (vapor to liquid ratio, temperature)
- Must be portable, with an approximate weight of 10 kg, easy to use by one person, with a processing time of less than 12 ½ minutes.
- Must have an operating range of 5 to 1000 ppm for H2S concentration, with a relative standard deviation on the measurements less than 10% sample to sample and accuracy similar to that obtained with gas chromatography with a thermal conductivity detector over the 5-1000 ppm range
- Must be robust for field operability
- Must be simplistic in design to minimize cost
The proposed contract will include an option to optimize and validate the field tester through field testing.
Contract duration
Refer to the description above for full details.
Trade agreements
-
No trade agreements are applicable to this solicitation process
Contact information
Contracting organization
- Organization
-
Transport Canada
- Address
-
330 Sparks StOttawa, Ontario, K1A 0N5Canada
- Contracting authority
- Weir, Bruce
- Phone
- 613-993-7415
- Email
- bruce.weir@tc.gc.ca
- Address
-
275 Sparks StreetOttawa, ON, K1A 0N5CA
Buying organization(s)
- Organization
-
Transport Canada
- Address
-
330 Sparks StOttawa, Ontario, K1A 0N5Canada
Bidding details
Details for this tender opportunity are provided in the Description tab.
Please contact the contracting officer to get the full solicitation documentation, access information on how to bid, or if you have any questions regarding this tender opportunity.
Note that there may be fees to access the documents or bid. These should be outlined in the Description tab.
We recommend that you contact the contracting officer as soon as possible, as there may be deadlines for receiving questions.