Perimeter MDS & PA System
Solicitation number 21120-174683/A
Publication date
Closing date and time 2017/06/02 15:00 EDT
Last amendment date
Description
Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: AMENDMENT 3 ISSUED TO EXTEND THE SOLICITATION CLOSE DATE ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Perimeter MDS & PA System 21120-174683/A McLaughlin, Michael Telephone No. - (819) 420-0330 CSC has a requirement to replace the existing buried cable volumetric Motion Detection System (MDS) and Head End switching equipment associated with the PIDS PA system at Drumheller and Bowden Institutions. The existing PIDS MDS and PA were installed in Drumheller in 2000 and Bowden in2002. The MDS is reaching the end of its service life. The PA speakers along the perimeter of the Institution and theassociated cabling to the switcher in the CER are still functioning and do not need to be replaced. However, the PA Amplifier, switchingcapability and the connection to the PIDS/FAAS need to be replaced. Drumheller Institution - Drumheller Institution is in Drumheller, Alberta. It is a medium and minimum security facility. Inmates are housed in direct observation living units or residential houses. Currently construction is complete on a new 96 bed medium living unit. A new 50-b ed minimum unit was completed in 2014. At the same time, Drumheller is expanding the correctional and rehabilitation programs that they offer. Bowden Institution Bowden Institution is in Innisfail, Alberta. It is a medium and minimum security facility. Inmates arehoused in direct observation living units or residential houses. Currently construction is complete on one new 96 bed mediumliving unit. Work is due to be completed in 2014-2015. A new 50 bed minimum living unit was completed in January 2012. Bowden isalso currently expanding the correctional and rehabilitation programs that they offer. This Statement of Technical Requirements (STR) willcover the technical requirements for the required work. It is mandatory that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for site visits to be held at: Drumheller March 22nd @ 9:00am& Bowden March 23rd @ 9:00am. Interested Bidders shall meet at the Principal Entrance: Locations: 1) Drumheller Institutionisin Drumheller, Alberta. It is a medium and minimum security facility; Drumheller Institution Highway #9 PO Box 3000 Drumheller, Alberta T0J 0Y0 Tel: (403) 823-5101 Fax: (403) 823-8666 2) Bowden Institution is in Innisfail, Alberta. It is a medium and minimum security facility Bowden Institution Highway #2 PO Box 6000 Innisfail, Alberta T4G 1V1 Tel: (403) 227-3391 Fax: (403) 227-6022 Bidders will be required to sign an attendance form at each site visit. Bidders should confirm in their bids that they have attended the site visit. Bidders who do not attend or send a representative to the sitevisit will not be given an alternative appointment and their bids will be rejected as non-compliant. The onus is on the biddersto arrive at the site visit in a timely manner. Bidders arriving late may not be permitted to attend the site visit. The Bidder must have at least one attendee at the site visit. It is also a mandatory condition of this requirement that all attendees have a site clearance for each location prior to the site visits. To apply for the site clearances, the Bidders must complete a CPIC Clearance Request form (preferably in typed format) for each inst itution and submit the duly completed and signedforms by each participant, by fax to (819) 953-4944 or by e-mail to michael.mclaughlin@pwgsc.gc.ca. It is a mandatorycondition that the CPIC Clearance Requests and a copy of the participants Driver’s License be sub mitted for each site visit. It is requested that the CPIC Clearance Requests and a copy of the participants Driver’s License be received by th is office no later than March 10th 2017. Site Clearance Request Forms and the participants Driver’s License received after March 10th 2017 will not be accepted. A site clearance obtained for work performed under similar requirements is not acceptable. Bidders are requested to cle arly identify the name of the participant, the name of the company they represent, telephone number, facsimile number and e-mail address. Bidders should submit in writing to the Contracting Authority, a list of issues that they wish to table and the languagethey would like to address questions and answers, no later than five (5) calendar days prior to the scheduled site visit. Bidders are advised that any clarifications or changes resulting from the site visit shall be included as an amendment to the bid soli citation document through buyandsell.gc.ca. As proof of attendance, the Bidder must sign the attendanceform provided by the CSC representative at the site visit. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
Contract duration
Refer to the description above for full details.
Trade agreements
-
World Trade Organization Agreement on Government Procurement (WTO GPA)
-
Canada-Panama Free Trade Agreement
-
Agreement on Internal Trade (AIT)
-
Canada-Colombia Free Trade Agreement
-
Canada-Peru Free Trade Agreement (CPFTA)
-
North American Free Trade Agreement (NAFTA)
Contact information
Contracting organization
- Organization
-
Public Works and Government Services Canada
- Address
-
11 Laurier St, Phase III, Place du PortageGatineau, Quebec, K1A 0S5Canada
- Contracting authority
- McLaughlin, Michael
- Phone
- (819) 956-3622 ( )
- Email
- michael.mclaughlin@tpsgc-pwgsc.gc.ca
- Address
-
11 Laurier St./11, rue Laurier
7B3, Place du Portage, Phase IIIGatineau, Québec, K1A 0S5
Buying organization(s)
- Organization
-
Correctional Service of Canada
- Address
-
340 Laurier Ave WOttawa, Ontario, K1P0P9Canada
Bidding details
Full details regarding this tender opportunity are available in the documents below. Click on the document name to download the file. Contact the contracting officer if you have any questions regarding these documents.
Document title | Amendment no. | Language | Unique downloads | Date added |
---|---|---|---|---|
ABES.PROD.PW__HN.B334.F72430.EBSU005.PDF | 005 |
French
|
0 | |
ABES.PROD.PW__HN.B334.F72430.EBSU004.PDF | 004 |
French
|
1 | |
ABES.PROD.PW__HN.B334.E72430.EBSU005.PDF | 005 |
English
|
16 | |
ABES.PROD.PW__HN.B334.E72430.EBSU004.PDF | 004 |
English
|
14 | |
ABES.PROD.PW__HN.B334.F72430.EBSU003.PDF | 003 |
French
|
1 | |
ABES.PROD.PW__HN.B334.E72430.EBSU003.PDF | 003 |
English
|
15 | |
ABES.PROD.PW__HN.B334.F72430.EBSU002.PDF | 002 |
French
|
2 | |
ABES.PROD.PW__HN.B334.E72430.EBSU002.PDF | 002 |
English
|
12 | |
ABES.PROD.PW__HN.B334.F72430.EBSU001.PDF | 001 |
French
|
0 | |
ABES.PROD.PW__HN.B334.E72430.EBSU001.PDF | 001 |
English
|
18 | |
ABES.PROD.PW__HN.B334.F72430.EBSU000.PDF | 000 |
French
|
4 | |
ABES.PROD.PW__HN.B334.E72430.EBSU000.PDF | 000 |
English
|
57 |
Access the Getting started page for details on how to bid, and more.