NAFC Water System HDPE Piping & Equipment

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada-Peru
FTA/Canada-Colombia FTA
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements: 
NAFC Water System HDPE Piping & Equipment

E0224-132499/A
Chaulk (OLZ) Patricia
Telephone No. - (709) 772-8357 
Fax No. - (709) 772-4603


The Department of Fisheries and Oceans (DFO), Northwest Atlantic
Fisheries Centre (NAFC) St. John's, NL has a requirement for
HDPE Piping, Valves and associated equipment as follows:

1. Eight (8) each
Eight inch (200 mm) Polyethylene Ball valves, Full Port, PE Wall
- SDR11, Normal OD - 8.625 inches, Materials:  PE3408/PE100
Black SDR 11 rated @ 160 PSI for water.  Temperature: From -20 F
to 140 F (-20 C to 60 C. Pipe Connection - Butt Fusion and
supplied with Butt Fused Joint Insulation Kit (50 mm thick UIP
Urethane Insulation). Valves to meet ASTM D 2513 Requirements.

2. Sixteen (16) each
Eight inch (200 mm) DR11 Electrofusion Couplings, (200 mm)
8"iron pipe size (IPS) Electrofusion coupling, SDR11 240 PSI,
made from PE100, ASTM D-3261, ASTM D-3350, AWWA C-906, DIN16963,
EN1555, EN12201, meets FM Class 200.

3. One (1) each
Electrofusion machine Operating Type: Controlled voltage.
Operating Modes: Manual, Fusamatic #1, Bar Code Operating
Languages: minimum English and French (others on request)
Operating Temperature: 14oF to 104oF #2 Welding Voltage: 8 to 48
V ac (39,5 V) Welding Current: 1 to 65 A ac (true rms) (100 A
short term) Welding Power: 8 VA to 3120 VA Welding Time: 1 to
3600 seconds Apparent Power Factor: 0.15 to 0.92 Supply Voltage:
#3 110 V ac (+/- 20%) 40 to 60 Hz Supply Current: #3 1 to 30 A
ac (true rms) Supply Power: #3 3,500 W (peak at 0.15 APF) Supply
Voltage: #4 230 V ac (+/- 20%) 40 to 60 Hz Supply Current: #4 1
to 15 A ac (true rms) Supply Power: #4 3,500 W (peak at 0.15
APF) Supply Protection: Class 1 - Earthed Data log memory: 2048
welds Data download/upload: USB flash memory drive IP65 Extended
temperature unit is with limits -40oF to +122oF. The unit is
230v operation.

4. Sixty five (65) each, 
15.24 m (50 ft.) long of pre insulated SDR 11 HDPE pipe. Pipe to
be 8" (200 mm) DR11, rated for 200 psi with 50 mm (2") thick UIP
urethane insulation, 50 Mil taped outer jacket suitable for
direct bury application and one (1) butt fused joint insulation
kit per 50 ft. Length. Insulation to be; rigid polyurethane
foam, factory applied, 50 mm thick, Density ASTM D 1622, 35 to
46 kg/m3, Closed cell content, ASTM D 6226, 90% minimum and
Water absorption ASTM D 2842, 4% by volume Tape Wrap System;
polyethylene, UV inhibited, formulated for cold environment,
Sealant, butyl rubber and resin applied in hot 25 Mil multiple
layers to provide a shrink tightened waterproof bond. All pipe
lengths shall come with removable end caps to prevent anything
from entering/contaminating the pipe as it will be stored
outside subject to weather, UV rays and environmental conditions

5. One (1) each Pipe scraper similar or equal to a Ritmo RTC315



Delivery Destination:

Northwest Atlantic Fisheries Centre (NAFC)
70-80 East White Hills Road
St. John's, NL

This requirement is subject to the provisions of the Agreement
on Internal Trade (AIT); and the North American Free Trade
Agreement (NAFTA).

The PWGSC office provides procurement services to the public in
English but documents may be submitted in either official
language of Canada.









Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any
procurement.

Documents may be submitted in either official language of Canada.