HIGH PRESSURE WATER JET

Trade Agreement: NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements: 
				        STATEMENT OF WORK


A high pressure water jet apparatus rated 20,000 PSI at  7.0 GPM
plus or minus 20% is required for unmolding and crushing a
cemented waste contained in 20-litres pail. The unit must be
equipped as follow:

			
A.	GENERAL CHARACTERISTICS						 

		Yes / No	   Cross reference
M1	20 000 PSI rated pump at 7.0 GPM plus or minus 20%, with
inline designed fluid end constructed of high strength stainless
steel to eliminate corrosion and maximize strength	 			
M2	Field proven 3" stroke triplex power end	    		
M3	Discharge plumbing including pressure gauge	    		
M4	100 horsepower (100Hp) 575/3/60 T.E.F.C. electric motor plus
or minus 10 Hp			
M5	100 HP 575 soft starter 		
M6	Complete belt drive system with guard	    		
M7	Flow control valve installed on unit			
M8	Pressure regulating valve installed on unit		
M9	10 µm stainless steel bag filter assembly			
M10	Hose rack. 			
M11	Suction stabilizer.	     		
M12	20 000 PSI rated dump gun with quick connect                
                                        		
M13	50 feet discharge hose with protective cover and quick
coupler                          		
M14	20 000 PSI rated rotating surface cleaning nozzle           
                                        		
M15	20 000 PSI rated Gopher (or equivalent) rotating nozzle     
                                                          		
 B.			
M16	SECURITY CHARACTERISTICS		
M17	Two (2) rupture discs and automatic plunger lubricator		
M18	Low pump oil level shutdown.	                 		
C.	Low water pressure shutdown.			
M19	PHYSICAL\ENVIRONMENTAL CHARACTERISTICS		
M20	Heavy duty 5" structural steel skid with ¼" deck plate plus
or minus 10%.		
M21	Fork-lift slots on skid for lifting and moving		
M22	Unit dimensions must be: H x W x L -  1.5 x 1.5 x 2.5 m plus
or minus 0.3 m		
D.	The storage temperature limits range must be -20 to 40
Celsius 		
M23	ELECTRICAL\OPERATIONAL CHARACTERISTICS		
E.	3 Phase, 575 Volt, 60 Hz		
M24	STANDARDS\TRAINING		
M25	The Contractor must provide on-site start-up of the system
and training upon arrival at the NRCan Facility in Ottawa,
Ontario		
M26	Must provide with a user manual and service manual with a
list of replacement parts		
M27	The unit must  be in compliance with CSA electrical
standards or any equivalent Canadian certification		


Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any
procurement.

Documents may be submitted in either official language of Canada.