Restoration of the runway 05-23, the taxiway Alpha and the movements areas, Blanc Sablon Airport

Trade Agreement: CETA/WTO-AGP/CPTPP/FTAs with Peru/Colombia/Panama/Korea/UK
Tendering Procedures: All interested suppliers may submit a bid
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements: 

TITLE

Restoration of the runway 05-23, the taxiway Alpha and the Movements areas of Blanc Sablon Airport

PROJECT DESCRIPTION

.1 The work of this contract is located at the Blanc-Sablon Airport (CYBX) north of the village of Blanc-Sablon in the administrative region of Côte-Nord in Quebec.
.2 The work consists of the rehabilitation of the airport's movement area including runway 05-23, the taxiway, the deck and the long-term parking on the city side including various related works.

WORK DESCRIPTION

The work includes, but is not limited to:

In 2022 :
.1 the supply, transport and heaping in Blanc-Sablon, of the aggregates necessary for the preparation of bituminous asphalt and granular levelling materials.

In 2023:
.1 On the deck and on the taxiway; crack repairs, removal of existing paving, addition and granular corrections where prescribed, installation of new bituminous concrete coating including marking and temporary and permanent marking.
.2 On long-term parking; the earthworks and foundation work necessary for the expansion of the parking lot, the granular reloading of the existing parking lot, the installation of lighting and the asphalt concrete covering including pavement marking.
.3 Repairs to the security fence on the perimeter of the airport. The fences to be repaired are of the type with metal wires with square mesh, chain mesh and wood. The Departmental Representative will indicate on site the nature and exact scope of the repairs to be carried out.

In 2024:
.1 On the runway; the temporary widening of the runway and according to the phasing indicated on the plans; the removal of existing bituminous concrete coatings, the addition of granular foundation materials, the laying of a new bituminous concrete coating including marking and temporary and permanent marking.

SITE VISIT  / BIDDERS CONFERENCE

There will be no site visit.  It’s the bidders’ responsibility to obtain all the information relating to the conditions that may affect the performance of the work.

IMPORTANT NOTICE TO BIDDERS REGARDING BID SUBMISSION REQUIREMENTS:

In order to respond to this bid solicitation, bidders must submit their bids electronically using the Canada Post Corporation (CPC) Connect service. Please refer to SI06 - SUBMISSION OF BID for more information.

Bids in hard copy (delivered in person or by mail or courier) or transmitted by facsimile will not be accepted in this bid solicitation.

MANDATORY CRITERIA AT CLOSING DATE

The Bidder shall enclose bid security with its bid.

PERIOD OF WORK

The Contractor must perform and complete the Work no later than September 30, 2024.  For the detailed schedule, please refer to Specifications, Section 01 11 01, Paragraph 1.14 DEADLINE FOR THE EXECUTION OF THE WORK.

INQUIRIES

All enquiries regarding this tender, are to be submitted in writing to the Contracting Authority at Isabelle.Girard@tpsgc-pwgsc.gc.ca.

LANGUAGES

This PWGSC office provides acquisition services to the public in both official languages.
Ce bureau de TPSGC fournit des services d'achat au public dans les deux langues officielles.
Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.