Continuous pulse-free high-pressure pump
Solicitation number 23584-170309/A
Publication date
Closing date and time 2016/11/08 14:00 EST
Description
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: Vindum Engineering, Inc. 1 Woodview Court San Ramon California United States 94582 Nature of Requirements: Continuous pulse-free high-pressure pump 1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. 2. Definition of the requirement For the supply and delivery of (1) VP - 12K HC Continuous pulse-free high-pressure pump for the department of Natural Resources Canada. Ottawa, ON BACKGROUND The product (continuous pulse-free high-pressure pump) is to be used for Natural Resources Canada Nuclear Magnetic Resonance Analyzer (NMR). The pump was not included in that NMR analyzer when it was purchased, the vendor of the NMR analyzer recommended the product. The overburden probe will require a 1/8’’ pipe line for confining and flow pressure as well as the necessary pumps that are not supplied with the Geospec 12-53 rock core imager. The compatibility of other products is uncertain and it is not feasible to test the products for the compatibility before purchasing. The vendor of our NMR analyzer recommended this product, whose performance has been proven in their lab. 3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements) Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following Specifications: SPECIFICATIONS: Maximum pressure: 12,000psi Flow rate range: 0.0001ml/min - 30ml/min Flow Rate Accuracy: +/- 0.1% of set flow rate Flow Rate Resolution: 0.000001 ml/minute Volume Accuracy: +/- 0.1% of volume pumped Volume Resolution: 0.000001 ml Flow rate & volume repeatability: 0.05% Pressure Accuracy: +/- 0.25% of Full Scale Pressure Resolution: 0.1 psi 4. Applicability of the trade agreement(s) to the procurement This procurement is subject to the following trade agreement(s): a. Agreement on Internal Trade (AIT) b. North American Free Trade Agreement (NAFTA) 5. Justifications for the Pre-Identified Supplier The supplier selected in advance and identified: Vindum Engineering Inc. Is the only known supplier meeting all the specifications required in section 3, and is compatible with the NMR analyzer. 6. Government Contracts Regulations Exception(s) The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "onlyone person is capable of performing the work"). 7. Exclusions and/or Limited Tendering Reasons The following exclusion(s) and/or limited tendering reasons are invoked under the: Agreement on Internal Trade (AIT) Article 506: 12. Where onlyone supplier is able to meet the requirements of a procurement, an entity may use procurement procedures that are different from those described in paragraphs 1 through 10 in the following circumstance: b) Where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists; North American Free Trade Agreement (NAFTA) Article1016: Limited Tendering Procedures: 2. An entity may use limited tendering procedures in the following circumstances and subject to the following conditions, as applicable: b) Where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there isan absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists. 8. Delivery date The delivery of the Pump must bedelivered within 2 months after contract award, but no later than 15 December 2016. 9. Name and address if the pre-identified supplier Vindum Engineering Inc. 1 Wood view Court, San Ramon CA, 94582 10. Cost estimate of the proposed contract The estimated value of the contract is USD $25,400 HSTI. 11. Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described inthe ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. 12. Closing date for a submission of a statement of capabilities The closing date and time for accepting statements of capabilities is: November 8th, 2016 at 2:00 p.m. EST. 13. Inquiries and submission of statements of capabilities are to be directed to: Vashti Ramnarine Supply Officer 33 City Centre Drive, Suite 480-C Mississauga, ON L5N 3C2 Telephone: 905-615-2419 E-mail: Vashti.Ramnarine@pwgsc-tpsgc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
Contract duration
Refer to the description above for full details.
Trade agreements
-
Canada-Panama Free Trade Agreement
-
Agreement on Internal Trade (AIT)
-
Canada-Colombia Free Trade Agreement
-
Canada-Peru Free Trade Agreement (CPFTA)
-
North American Free Trade Agreement (NAFTA)
Reason for limited tendering
A contracting officer can use limited tendering for specific reasons outlined in the applicable trade agreements. The reason for this contract is described below:
-
Exclusive Rights
Contact information
Contracting organization
- Organization
-
Public Works and Government Services Canada
- Address
-
11 Laurier St, Phase III, Place du PortageGatineau, Quebec, K1A 0S5Canada
- Contracting authority
- Ramnarine, Vashti
- Phone
- (905) 615-2419 ( )
- Fax
- (905) 615-2060
- Address
-
Ontario Region
33 City Centre Drive
Suite 480Mississauga, Ontario, L5B 2N5
Buying organization(s)
- Organization
-
Natural Resources Canada
- Address
-
580 Booth StOttawa, Ontario, K1A 0E4Canada
Bidding details
Details for this tender opportunity are provided in the Description tab.
Please contact the contracting officer to get the full solicitation documentation, access information on how to bid, or if you have any questions regarding this tender opportunity.
Note that there may be fees to access the documents or bid. These should be outlined in the Description tab.
We recommend that you contact the contracting officer as soon as possible, as there may be deadlines for receiving questions.