FAB&DEL 5.3-5.5M ALUM OPEN BOAT
Solicitation number F7047-130045/A
Publication date
Closing date and time 2014/04/30 17:00 EDT
Last amendment date
Description
Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: REQUIREMENT To carry out the design, construction, test, trial and delivery of two (2) 5.3. - 5.5 M Open boat Mission Statement: Mission Statement: Open boats are used extensively as auxiliary craft for the CCG Fleet of Boats, as well as operating independently to carry out various program-related activities from shore-based facilities and trailers. 1. The primary mission is as a workboat, including environmental response, search and rescue, emergency boat duties. The vessel will operate in shallow waters must have the ability to be beached on sloping shorelines. The engine must be able to completely trim/tilt out of the water & the vessel must be able to operate with the engine in a "trimmed-up" attitude. 2. The Boats must be as an open boat with an offset console (stbd side). The bow is to be U-shaped at top of bulwarks with an open deck accessible by side decks around the console maximising the forward working area at the bow. The Boat will be used to conduct Canadian Coast Guard operations. The boat is required to be capable of operating in open water conditions (waves & swells up 1.85 meter) while providing a reasonable standard of passenger comfort. The vessel will be trailered locally on paved roads with occasional travels on gravel logging roads. It is desirable that this Boat has a high-speed capability of at least 32 knots. Utilization: The crafts must be capable of being ship-borne or shore-based: launched and recovered by stern ramp, davits or other means of hoisting such as derricks/cranes utilizing bridle; These craft will be primarily ship-based and will be launched and lifted aboard ships. They must have the capability to be launched/recovered by a trailer or deployed from a shore facility dock. DELIVERY Fabrication and delivery of these vessels with trailers to their destinations are requested by June 26, 2014.. PHYSICAL CHARACTERISTICS OF THE VESSEL Length overall between 5.3 and 5.5 meters being able to carry: crew of 2 = 200 kg Maximum capacity to be minimum 6 persons Fuel = Minimum 200 litres in one or two tank(s), (156 kg) Equipment & supplies = 200 kg Payload capacity to be minimum 500 kg, / 1100 lb. in addition to full fuel MANDATORY CONSTRUCTION STANDARDS 1. Transport Canada Marine Safety Regulation TP 1332 "Construction Standards for Small Vessels", which incorporate references to ABYC standards for equipment such as fuel tanks and fuel systems, as well as tank space ventilation, and ISO standards for stability, loading capacity, etc. as delegated to ISO 12217-1. Http://www.tc.gc.ca/MarineSafety/Directorate/TP/tp1332/tp1332e.ht m 2. Canadian Standards Association C22.2 NO. 183.2-M1983 (R1999) "Standards for D.C. Electrical Installations on Boats and ABYC 'E' electrical standards." TRADE AGREEMENTS This Purchase is being made under GSIN N1940G, and therefore subject to the Agreement on Internal Trade and the North American Free Trade Agreement (NAFTA). Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
Contract duration
Refer to the description above for full details.
Trade agreements
-
No trade agreements are applicable to this solicitation process
Contact information
Contracting organization
- Organization
-
Public Works and Government Services Canada
- Address
-
11 Laurier St, Phase III, Place du PortageGatineau, Quebec, K1A 0S5Canada
- Contracting authority
- Godin, Andre
- Phone
- (250) 363-3152 ( )
- Fax
- (250) 363-3960
- Address
-
401 - 1230 Government StreetVictoria, B. C., V8W 2Z4
Buying organization(s)
- Organization
-
Fisheries and Oceans Canada
- Address
-
200 Kent St, Station 13E228Ottawa, Ontario, K1A 0E6Canada
Bidding details
Full details regarding this tender opportunity are available in the documents below. Click on the document name to download the file. Contact the contracting officer if you have any questions regarding these documents.
Document title | Amendment no. | Language | Unique downloads | Date added |
---|---|---|---|---|
ABES.PROD.PW_XLV.B176.F6451.EBSU000.PDF | 000 |
French
|
11 | |
ABES.PROD.PW_XLV.B176.F6451.EBSU001.PDF | 001 |
French
|
5 | |
ABES.PROD.PW_XLV.B176.F6451.EBSU002.PDF | 002 |
French
|
0 | |
ABES.PROD.PW_XLV.B176.E6451.EBSU000.PDF | 000 |
English
|
15 | |
ABES.PROD.PW_XLV.B176.E6451.EBSU002.PDF | 002 |
English
|
5 | |
ABES.PROD.PW_XLV.B176.E6451.EBSU001.PDF | 001 |
English
|
6 |
Access the Getting started page for details on how to bid, and more.