PC SUP&DEL AL BOAT

Trade Agreement: NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements: 
PC - FAB & DEL TWO(2) UP TO 28'0" FOOT BOATS

REQUIREMENT
Carry out the design, construction, test, trial and delivery of
two (2) 27'0" to 28'0" foot aluminium cabin boat for Parks
Canada, in accordance with the associated Technical
Specifications detailed in the Statement of Work and Project
Management Services attached as Annexes A and H.  

One Vessel is a supply vessel for delivery of crews, supplies
and equipment.

The other Vessel is a dual purpose vessel for delivery of crews
and also research and monitoring platform for field operations.

DELIVERY
Delivery of these vessels, to their various destinations
(Skidegate, BC) , must be completed by the MANDATORY delivery
date of 2 August 2012.

PHYSICAL CHARACTERISTICS OF THE VESSELS

1.	Length (hull) must be approx. 8.2m to 8.5m
2.	Normal load conditions
		a)	Crew of 8-10	 		
		b)	Fuel	 			175 litres in one tank
		c)	Equipment and supplies 	500 kg.

REQUIRED OPERATIONAL PERFORMANCE
1.	Unless otherwise stated, performance must be for conditions
of zero sea state and no wind, in fresh water with Normal Load
and complement.  The craft must be designed and constructed for
ease of maintenance and repair, long life, and to be easily
supportable by local commercial facilities and suppliers.  The
craft is expected to have a service life of at least 10 years,
with an expected usage of between 250 and 500 hours per year.
2.	Maximum desired speed of 35 knots in Normal Load condition.

MANDATORY CONSTRUCTION STANDARDS 
1.	Transport Canada Marine Safety Regulation TP 1332
"Construction Standards for Small Vessels", which incorporate
references to ABYC standards for equipment such as fuel tanks
and fuel systems, as well as tank space ventilation, and ISO
standards for stability, loading capacity, etc. as delegated to
ISO 12217-1.
	
Http://www.tc.gc.ca/MarineSafety/Directorate/TP/tp1332/tp1332e.ht
m
2.	Under ISO 6185-3 upper limit at 8 meters, stability testing
must be arranged for this vessel, as described in ISO 6185-3,
near the completion of construction to verify compliance.  
3.	Canadian Standards Association C22.2 NO. 183.2-M1983 (R1999)
"Standards for D.C. Electrical Installations on Boats and ABYC
'E' electrical standards."
4.	Transport Canada Marine Safety Regulation TP 1324 "Coated
Fabrics".
 	
http://www.tc.gc.ca/MarineSafety/Directorate/TP/tp1324/tp1324e.ht
m

TRADE AGREEMENTS
	This purchase is being made under GSIN N1940G, and is therefore
subject to the Agreement on Internal Trade (AIT).
Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any
procurement.

Documents may be submitted in either official language of Canada.