TENTAGE ITEMS
Solicitation number W8486-135059/A
Publication date
Closing date and time 2013/03/14 14:00 EDT
Last amendment date
Description
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: The bidder must supply Canadian goods and/or services Attachment: YES (PWGSC) Paper Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Amendment 005 is raised to change the closing time from Eastern Standard Time to Eastern Daylight Savings Time. All other terms and conditions of the solicitation remain the same. A proposal already submitted may be amended prior to closing time by sending the amended correspondence to Bid Receiving, the envelope/fax bearing the Solicitation No. W8486-135059/A and the new closing date March 14th, 2013. CASE, TENT; 2,000 UNITS. FLY, TENT; 2,000 UNITS. TENT : ARCTIC, 10 MAN; 500 UNITS; MATERIAL: CLOTH TWILL, NYLON/COTTON; CLOTH WEIGHT: 169.0 GRAMS PER SQUARE METER NOMINAL COLOR: CANADIAN AVERAGE GREEN; FLOOR SHAPE: PENTAGON; LENGTH: 16.167 FEET NOMINAL; WIDTH: 16.0 FEET NOMINAL; LATERAL SIDE LENGTH: 120.0 INCHES; CENTER HEIGHT: 8.250 FEET NOMINAL; SIDEWALL HEIGHT: 3.0 FEET NOMINAL; FLOOR MATERIAL: WITHOUT FLOOR. TENT: ARCTIC SURVIVAL; 800 UNITS; MATERIAL: CLOTH TWILL; NYLON/COTTON, IR REFECTIVE; CLOTH WEIGHT: 169.0 GRAMS PER SQUARE METER NOMINAL; ENVIRONMENTAL PROTECTION: WATER REPELLENT; COLOR: CANADIAN AVERAGE GREEN; FLOOR SHAPE: PENTAGON; LATERAL SIDE LENGTH: 90.000 IN. LONG EA LATERAL SIDE; CENTER HEIGHT: 8.333 FEET NOMINAL; SIDEWALL HEIGHT: 2.0 FEET NOMINAL; FLOOR MATERIAL: WITHOUT FLOOR. Required for the Department of National Defence to be delivered to the Montreal and Edmonton warehouses, requested for August 31, 2013. Two options exists for a minimum of 100% up to a maximum of 200% of the above quantities. The requirement is solely limited to Canadian goods. To assure a response before the bid closing date, all enquiries about this requirement must be submitted in writing and received by the Contracting Authority at least 7 calendar days prior to the bid closing date. Technical Data shall be automatically issued, under separate cover upon request for the bid documentation. Therefore, it is imperative that this request for bid documentation be done as soon as possible to ensure timely receipt of the associated technical data. Notwithstanding the Crown shall not be held responsible for untimely release of technical data, since technical package and sealed sample shall be available for viewing at the following Department of Public Works and Government Services regional offices: Montreal, PQ Mississauga, Ont Quebec, Quebec Winnipeg, Man Edmonton, Alta Vancouver, BC Gatineau, QC Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
Contract duration
Refer to the description above for full details.
Trade agreements
-
Agreement on Internal Trade (AIT)
Contact information
Contracting organization
- Organization
-
Public Works and Government Services Canada
- Address
-
11 Laurier St, Phase III, Place du PortageGatineau, Quebec, K1A 0S5Canada
- Contracting authority
- Sinka, William
- Phone
- (819) 956-3511 ( )
- Fax
- (819) 956-5454
- Address
-
11 Laurier St./ 11, rue Laurier
6B1, Place du PortageGatineau, Québec, K1A 0S5
Buying organization(s)
- Organization
-
Department of National Defence
- Address
-
101 Colonel By DrOttawa, Ontario, K1A0K2Canada
Bidding details
Full details regarding this tender opportunity are available in the documents below. Click on the document name to download the file. Contact the contracting officer if you have any questions regarding these documents.
Document title | Amendment no. | Language | Unique downloads | Date added |
---|---|---|---|---|
ABES.PROD.BK__PR.B714.E61307.ATTA002.PDF |
English
|
5 | ||
ABES.PROD.BK__PR.B714.E61307.EBSU005.PDF | 005 |
English
|
1 | |
ABES.PROD.BK__PR.B714.E61307.ATTA003.PDF |
English
|
4 | ||
ABES.PROD.BK__PR.B714.E61307.EBSU004.PDF | 004 |
English
|
1 | |
ABES.PROD.BK__PR.B714.E61307.EBSU003.PDF | 003 |
English
|
1 | |
ABES.PROD.BK__PR.B714.E61307.EBSU000.PDF | 000 |
English
|
19 | |
ABES.PROD.BK__PR.B714.E61307.EBSU001.PDF | 001 |
English
|
2 | |
ABES.PROD.BK__PR.B714.E61307.EBSU002.PDF | 002 |
English
|
2 | |
ABES.PROD.BK__PR.B714.F61307.EBSU001.PDF | 001 |
French
|
0 | |
ABES.PROD.BK__PR.B714.F61307.EBSU000.PDF | 000 |
French
|
2 | |
ABES.PROD.BK__PR.B714.F61307.EBSU002.PDF | 002 |
French
|
0 | |
ABES.PROD.BK__PR.B714.F61307.EBSU004.PDF | 004 |
French
|
0 | |
ABES.PROD.BK__PR.B714.F61307.EBSU003.PDF | 003 |
French
|
0 | |
ABES.PROD.BK__PR.B714.F61307.ATTA003.PDF |
French
|
1 | ||
ABES.PROD.BK__PR.B714.F61307.ATTA002.PDF |
French
|
3 | ||
ABES.PROD.BK__PR.B714.F61307.EBSU005.PDF | 005 |
French
|
0 |
Access the Getting started page for details on how to bid, and more.