DFO Wharf Reconstruction - Phillips Head, NL

Trade Agreement: Canadian Free Trade Agreement (CFTA)
Tendering Procedures: All interested suppliers may submit a bid
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements: 

Wharf Reconstruction - Phillips Head, NL
F6140-220101/A

Contact Name: Alexandria Dwyer
Telephone: 709-330-6330
Fax:  709-772-4603
Email:  Alexandria.Dwyer@pwgsc-tpsgc.gc.ca 

Public Services and Procurement Canada (PSPC) has a requirement, on behalf of the Department of Fisheries and Oceans for Wharf Reconstruction at Phillips Head, Newfoundland and Labrador.   The work covered under this project consists of the furnishing of all plant, labour, equipment and material for Wharf Reconstruction at Phillips Head, NL

In general, work under this contract will consist of but will not necessarily be limited to the following:

1. Demolition and removal of existing finger pier timber crib wharf and concrete launchway as indicated. Existing finger pier has a timber deck.

2. Dredge existing harbour bottom to depths of 1.5 m below L.N.T. in all areas as indicated.

3. Excavation of cribseat to elevations indicated.

4. Supply and installation of new timber crib finger pier wharf complete with reinforced concrete deck.

5. Supply and installation of new wheelguard, fender system, ladders and mooring cleats as indicated.

6. Re-grade existing site to accommodate surface runoff and new lauchway.

7. Construction of a new reinforced concrete lauchway with timber toe crib.

8. Construction of a new wharf approach consisting of the supply and installation of rock fill, Class ‘A’ and Class ‘B’ as indicated.

9. Supply and install rip rap as indicated.

10. Contractor shall present methodology of how they plan to perform the work to Departmental Representative for review and approval before the start of work. Methodology shall bear the stamp of a professional engineer registered to practice in the province of Newfoundland and Labrador.

FAMILIARIZATION WITH SITE

Before submitting a bid, bidders can visit the site and its surroundings, at their own expense and schedule, to review and verify the form, nature, and extent of the work, materials needed for the completion of the work, the means of access to the site, severity, exposure and uncertainty of weather, soil conditions, any accommodations they may require, and in general shall obtain all necessary information as to risks, contingencies and other circumstances which may influence or affect their bid. No allowance shall be made subsequently in this connection on account or error or negligence to properly observe and determine the conditions that will apply.

Contractors, bidders, or those they invite to site are to review specification section on Health and Safety before visiting site. Take all appropriate safety measures for any visit to site, either before or after acceptance of bid.

Bidders must refer to R2710T (2021-04-01) GENERAL INSTRUCTIONS -CONSTRUCTION SERVICES for the Integrity Provisions applicable to this requirement. 



IMPORTANT NOTICE TO SUPPLIERS:

The Government Electronic Tendering Service (GETS) is available at Buyandsell.gc.ca.  Suppliers that elect to base their bids on documents obtained from other sources do so at their own risk.  Amendments, when issued, will be available on GETS.  It is the responsibility of the Bidder to ensure that all amendments issued prior to closing have been obtained and addressed in the submitted bid. 

In keeping with Canada’s commitment to green procurement, only electronic distribution of tenders and associated documents and/or construction drawings is available. Bidders can download and print the documents or bring them or send them by email to a print shop or other professional printing services for printing.

Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the bid and contract documents. These may be viewed at https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/all. 

Bids will be received in English, or French, at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador, A1C 5T2.

Recently, Public Services and Procurement Canada (PSPC) launched CanadaBuys (https://canadabuys.canada.ca/en/canadabuys), a new suite of procurement services to help you do business with us. The new services are designed to be easier and quicker to use than ever.

To prepare for the transition to CanadaBuys, we encourage you to register your business (https://canadabuys.canada.ca/en/getting-started) through SAP Ariba, our new electronic procurement solution. If you have any trouble getting started on SAP Ariba, the CanadaBuys Service Desk (https://canadabuys.canada.ca/en/contact-support) is here to help you.

In the last year, we’ve all had to adapt to the new realities of COVID-19. By moving the procurement process online, how we do business will be more efficient, more transparent, and more accessible for all our suppliers. 

GSIN: 5133C

The estimated value for this opportunity is in the range of $1,000,001 to $5,000,000. 

Bid Security is a requirement for this tender. 

Delivery Date Required: Thirty Four (34) weeks after award of contract. 

For any inquiries, please contact the Contracting Authority via telephone at (709) 330-6330 or via e-mail at Alexandria.Dwyer@pwgsc-tpsgc.gc.ca

Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.